Unlock/Lock; Battery Installation - FeiYu Tech QING Instructions Manual

2.1.2 Charging for the Remote Control
Using USB 2.0 to Micro cable to charge the remote control, support 5V/3A input.

2.2 Unlock/Lock

There is a position lock on the tilt axis, which is convenient for locking the
position, installation, storage.
Unlock the gimbal before powering on it.

2.3 Battery Installation

Please fully charge the dedicated battery before power on the
gimbal for the first time.
Install the battery: Push the battery in along the slot ①, and after that, the battery
lock ② will rebound to prevent battery from falling.
Remove the battery: Unlock the battery lock ② and pull the battery out.
www.feiyu-tech.com 5