Advertisement
®
ABB i-bus
EIB
ABB Powernet EIB
Functional description: IR control
46
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M(-500), 6x36/100x(-500), 6x36/100CB
General
The LEANtouch/SMARTtouch panel
can be addressed via IR remote
control. All the panel types operate
together with the Busch-Ferncontrol
IR hand-held transmitter. The
SMARTtouch B&O panel can
alternatively also be controlled by the
Bang&Olufson remote control Beo4.
The receiving range of a panel can be
set. The IR colours "white", "blue" or
"white & blue". It is possible to switch
between colours with the help of a
slide switch directly on the Busch-
Ferncontrol
®
hand-held transmitter. If
the IR range is set to "white & blue",
the panel software indicates the
individual push button pairs twice -
once for the "white" IR range and a
further time for the "blue" IR range.
The parameter "Bang&Olufson" only
operates together with the
SMARTtouch panel 6x36/100CB. If the
IR range is set to "Bang&Olufson", the
panel can either be operated via the
Busch-Ferncontrol
®
IR hand-held
transmitter or the Bang&Olufson Beo4
IR remote control.
Push button assignment
The individual push button pairs of
the Busch-Ferncontrol
®
IR hand-held
transmitter or the Bang & Olufson
remote control Beo4 can be assigned
the following functions:
– Switch,
– Dimmer,
– Shutter,
– Push button,
– Value
– and Lightscene external input.
The memo buttons of the IR hand-
held transmitter or the push buttons
green, orange, red, blue and stop of
the Bang & Olufson remote control
Beo4 can be used for sending
lightscene numbers.
Switch
With the "Switch" function, a 1-bit
communication object "Switch" is
enabled for the push button pair.
Switching telegrams are sent via this
object to the linked actuators. The
parameter "Behaviour" defines
whether the right or the left push
button switches "ON". The setting
"TOGGLE" means that toggling is
always carried out when the right or
left push button is pressed i.e. the
communication object adopts a new
value after each operation.
®
Example:
If the object currently has the value
"1", the object adopts the value "0"
after an operation and sends it. If the
object has the value "0", the object
value changes to "1" after an
operation. The value "1" is of course
also sent out after a change.
Dimmer
If the function of a push button pair is
defined as a dimmer, the push button
pair has two communication objects -
a 1-bit object "Switch" for sending
switching telegrams and a 4-bit
object "Dim" for sending dimming
telegrams.
A switching telegram (ON or OFF
telegram) is always sent after a short
operation. If a push button is operated
for a long period (>0.5 s), a dimming
telegram is triggered.
The parameter "Behaviour" defines
whether dimming brighter or darker is
carried out when the right or left push
button is pressed.
Shutter
The shutter functionality of a push
button pair causes a push button pair
to send stop/step telegrams after a
short operation and up/down
telegrams after a long operation
(>0.5 s) to linked shutter actuators.
The shutter function has two 1-bit
communication objects - "Step" (stop/
step) and "Move" (up/down).
The "Behaviour" parameter defines
whether the shutter is raised or
lowered when the right or left push
button is pressed.
Push button
Via the "Push button" function, it is
possible to send telegrams when a
push button of the pair is pressed,
released or pressed and released. A
1-bit communication object "Switch
left" or "Switch right" is available for
each push button of the pair.
January 2005
Advertisement
