Download  Print this page

Quick Reference - RCA Thomson CABLE MODEM Owner's Manual

Digital broadband cable modem
Hide thumbs

Advertisement

Minimum System Requirements
CPU
System RAM
Operating System
Available Disk Space
Sound Card
Video
CD-ROM Drive
Ethernet
USB Port
The Universal Serial Bus is a high speed bus that enables your computer to
communicate simultaneously with a variety of peripherals. If you have other
peripherals that send and receive a lot of information, such as speakers, printers or
scanners, we recommend using an Ethernet card to support this modem.
Connecting the Cable Modem
1.
Connect one end of the coaxial cable to the cable connection in the wall, and the other end
to the connector on the modem labeled CABLE.
2.
a.
Insert the plug from the AC power supply into the power AC jack on the cable modem.
b.
Insert the power cord into the AC adapter, and then plug into an AC outlet.
3.
For USB Connection: Connect one end of the USB cable to the USB port on the back of
your computer, and the other end to the USB port on the cable modem's back panel. (See
page 9 for instructions on loading the USB driver.)
OR
For Ethernet Connection: Connect one end of the Ethernet cable (straight-wired, see
above) to the Ethernet port on the back of your computer, and the other end to the
ETHERNET jack on the modem's back panel.
Mac Users: Mac OS or any other OS other than Windows 98SE, Me, 2000, or XP are not
currently supported for USB installation. Please use the Ethernet connection.
IBM PC COMPATIBLE
Pentium preferred
16MB (32MB preferred)
Windows 98SE/2000/Me/XP, Linux
125MB
Preferred
VGA or better (SVGA preferred)
Required for USB
10BaseT or 100BaseT
USB (Windows 98SE/2000/Me/XP only) N/A†

Quick Reference

MACINTOSH
PowerPC or higher
24MB (32MB preferred)
Mac OS 7.6.1 or higher
50MB
N/A†
VGA or better (SVGA built-in preferred)
Required
10BaseT or 100BaseT
43

Advertisement

Table of Contents
loading

  Related Manuals for RCA Thomson CABLE MODEM

This manual is also suitable for:

Dcm425