Using Windows 98 Se For Usb Connection - RCA Thomson CABLE MODEM Owner's Manual

Connecting the Cable Modem

Using Windows 98 SE for USB Connection

Follow steps 6 through 14 if you have a Windows 98 SE operating system:
6. When the "Add New Hardware Wizard" appears, click "Next" to initiate the search for drivers
for your USB device. (Fig. 3)
Note: If the "Add New Hardware Wizard" did not automatically appear, Windows 98 SE does
not recognize the cable modem's presence because your BIOS (Basic Input/Output System)
settings may not permit USB and/or Plug-and-Play devices. Please contact your computer's
customer service department.
7. Choose "Search for the best driver (recommended)" option, and click "Next."
(Fig. 4).
8. Choose ONLY the "CD-ROM drive" option and click "Next" (Fig. 5).
9. Choose "The updated driver (recommended)" option, and click "Next" (Fig. 6).
Fig. 3
Fig. 5
10
Fig. 4
Fig. 6