Table of Contents
Advertisement
SHORT TERM
■
Stop the engine and allow it to cool down before storing.
■
Clean all foreign material from the product.
■
Store the product in a cool, dry, and well-ventilated
place that is inaccessible to children.
■
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
■
Do not store outdoors.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, poor performance, and may void
your warranty.
WARNING
A leaking fuel cap is a fire hazard and must be replaced
immediately.
WARNING
Servicing requires extreme care and knowledge
and should be performed only be a qualified service
technician. For service we suggest you return the
product to your nearest authorised service centre for
repair. When servicing, use only identical replacement
parts.
WARNING
Do not, at any times, let brake fluids, solvents, gasoline,
petroleum-based products, penetrating lubricant, etc.,
to come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic which may result in
serious personal injury.
WARNING
Do not attempt to modify the product or create
accessories not recommended for use with the product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
■
Always stop the engine and allow it to cool down before
making any maintenance.
■
You may make adjustments and repairs described
in this manual. For other repairs, have the product
serviced by an authorised service centre.
Original instructions
■
Consequences of improper maintenance may include
excess carbon deposits resulting in loss of performance
and discharge of black lubricant residue dripping from
the muffler.
GRASS TRIMMER/BRUSHCUTTER
WARNING
The cutting attachment must not rotate in idle mode. If
this requirement is not satisfied, the clutch has to be
adjusted or the product needs an urgent maintenance
by a qualified technician.
WARNING
Note that the blade nut is a Nylon locking nut, which is
to be used for one time assembly only. Do not reuse the
Nylon locking nut. When installing/reinstalling, use a new
Nylon locking nut. Failure to follow this procedure can
result in serious injury.
WARNING
Make sure that the nut torque is ≥ 25 Nm when
assembling the blade. Failure to follow this procedure
can result in serious injury. (See page 15, step 5b)
■
For replacement line, use only filament line of the
diameter described in the specification table of this
manual.
■
After extending the new cutter line, always return the
product to its normal operation position before starting.
After each use, clean the product with a soft dry cloth.
■
Make sure all guards, straps, deflectors and handles
are properly and securely attached to avoid the risk of
personal injury.
HEDGE TRIMMER
WARNING
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. Never
touch blades or service the product with the spark plug
wire connected.
■
Consequences of improper maintenance may include
excess carbon deposits resulting in loss of performance
and discharge of black lubricant residue dripping from
the silencer.
■
After each use, clean the body and handles of the
product with a soft, dry cloth.
■
After each use, clean the debris from the blades
| English
5
Hide quick links:
Advertisement
Table of Contents
