Page 1
Dual Zone Wine and Beverage Refrigerator CWB2886FD Owner’s Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.6-06212019...
Important Safety Information Improper handling can cause serious damage to the EdgeStar wine and beverage refrigerator and / or injury to the user. This refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty.
Page 3
General Safety • To prevent back and other types of injuries, use at least two people to move and install the wine and beverage refrigerator. • This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
The instruction manual should be read before use. Introduction Thank you for purchasing this EdgeStar wine and beverage refrigerator. We hope that this purchase will be the beginning of a lasting and rewarding relationship between you and EdgeStar.
Carbon Filter A built-in carbon filter protects your beverages by acting as a natural barrier against harmful odors. Internal Fan This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature. Note: The Carbon filter should be replaced every 3 - 6 months depending on the unit’s exposure level to odor.
Installing the Wine and Beverage Refrigerator The wine and beverage refrigerator should be installed in accordance with local electrical code requirements. The wine and beverage refrigerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.
Installation Clearance Requirements Important Notes • Choose a location that has ambient temperatures above 50° F and below 90° F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. • This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water spray or drips.
Electrical Requirements ELECTRIC SHOCK HAZARD! • Plug into a grounded 3-prong outlet. • Never remove the grounding prong from the plug. • Never use an adapter to bypass the grounding prong. • DO NOT use an extension cord. • Failure to follow these instructions can result in fire, electrical shock, or death. Before you move your wine and beverage refrigerator into its final location, it is important to make sure you have the proper electrical connection: A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National...
Installing the Door Handle To install a door handle: Open the door and carefully pull back the door gasket around the area where the handle is to be installed. Insert each Phillips head screw through the gasket side of the door until the screw passes through the door.
Operation Installation Check List Before Operation Have all packing materials and tape been removed from the interior and exterior of the wine and beverage refrigerator? Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the wine and beverage refrigerator? Has the machine been leveled? Is the wine and beverage refrigerator in a site where the ambient temperature is...
• The Celsius or Fahrenheit light will be lit depending on which unit of temperature is being displayed. To switch between Celsius and Fahrenheit, press and hold the buttons at the same time for approximately 5 seconds until the temperature scale changes.
Preparing the Wine and Beverage Refrigerator for Storage If the wine and beverage refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to defrost the unit and dry the interior. Disconnect the wine and beverage refrigerator from the power supply by removing the power plug from the wall socket.
Troubleshooting Before Calling for Help If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem may be something that can easily be solved or explained. Symptoms Possible Causes Solutions...
Page 17
Symptoms Possible Causes Solutions The body of the wine and The unit is not grounded Contact your local electrician beverage refrigerator is properly. to test your electrical electrified. grounding system. Frost is forming in the wine The environment is humid. Though the unit uses an “auto-defrost”...
Specifications are subject to change. Check the rating label on the wine and beverage refrigerator for the most accurate information. Description of product Dual Zone Built-in Wine and Beverage Refrigerator Model CWB2886FD Voltage / Frequency AC 115V~60Hz Amperage 1.5 A Input Power...
WHAT IS COVERED: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Labor will be performed free of charge at an authorized EdgeStar repair facility and EdgeStar will supply new, rebuilt, or refurbished parts free of charge.
Need help?
Do you have a question about the CWB2886FD and is the answer not in the manual?
Questions and answers