In Ethernet Mode - Bodet KELIO PRIO V2 Instructions Manual

9.1.3 Employee clocking using a badge (for badge reader option)
Employees who cannot be enrolled or whose fingerprint quality is not high enough can clock in
without biometric identification by passing a badge over the terminal (optional). In this case, simply
assign the badge number written on the card to an employee in the application and pass the badge
in front of the reader. When the clocking is successful, the time and the employee's badge number
are displayed on the terminal.
9.1.4 Deleting fingerprints or a badge code from the terminal
If an employee leaves the company, you may need to delete their fingerprints from the terminal or
prohibit clocking with a certain code. To do so, press F2 on the biometric terminal and type the
administrator code to enter the main menu (p. 9).
Once you are in the corresponding sub-menu (menu
BIO=1, menu NUM=2), press 2 to access the deletion
options. Then the following screen is displayed:
Press 1 to delete the data by entering the badge
number. Confirm by pressing E. The following
message appears:
Press 2 to delete the data by choosing the badge
number from a list. Scroll through the list with keys 1
and 2. Press E to confirm.

9.2 In Ethernet mode

Before you can clock using the biometric sensor, you must "enrol" yourself. To do so, enter the
numerical code using the biometric terminal keypad (configured in the Kelio software installer,
Hardware > Terminals > S
9.2.1 Enrolment
1. Press 3 to access the biometrics management in
the opposite menu.
2. Press 1 to start the enrolment.
The following menu is displayed:
3. Press 1 to start the enrolment procedure by
swiping the badge.
N :
OTES
By pressing 2, you can also request enrolment by selecting the surname/first name from a list
instead of swiping the badge. Scroll through using keys 1 and 2 in this case.
Depending on the reader's technology, or the clocking mode
which is configured, certain menus will not be available and the
following screen is displayed without prior selection.
4. Swipe the badge in front of the reader when
the terminal displays this message.
> M menu, by default 1234) then press E.
ITES AINTENANCE
B D G = 1 R E T = F 1
L S T = 2
R E T = F 1
D E L
< 1 2 > R E T = F 1
1 2 3 4 5
I P = 1 R E T = F 1
B I O = 3
T E S T = 2
B I O R E T = F 1
E N R = 1 D E L = 2
E N R . R E T = F 1
L S T = 2
B D G = 1
R E T = F 1
I D E N T . Y R S L
F