Table of Contents
Advertisement
14. TECHNICAL CHARACTERISTICS
Description
Dimensions (mm)
Weight of the terminal
Battery
Power supply voltage
Max. electrical consumption
Under 230 V
voltage
AC
Electrical Umbilical Plug option
Power supply category
Mains supply diagram
Protection index
Operating temperature
Relative humidity
Time backup
Lithium battery
Relay switch
Cable on relay terminal block
Ethernet 10/100 Mbits link
Clocking storage capacity
Backup time
Badge reader
Clocking distance
Ethernet connection
Length=131 Height=189 Depth=59
0.64 kg (terminal only)
6 V / 1,6 Ah
0.12 kg
The battery with reference 932236 cannot be replaced by a
battery of another type.
110-230 V
, 50/60 Hz 100-65 mA
AC
Mains supply (110-230 V
IEEE 802.3af - 12.95 W - category 3
Category II
TT or TN diagram
IP 31
0 °C to +40 °C
15 to 90 % non-condensing
6 years with internal CR1225 Lithium battery
There is a risk of explosion if the lithium battery is inserted
incorrectly. Use the same model or an equivalent model
recommended by this manual when changing the battery.
Follow the instructions in this manual when replacing the
lithium battery. The battery must only be replaced by
maintenance staff. The battery must be a CR1225-type
Lithium battery.
Disconnection 230 V
Possibility to switch a SELV voltage (Separated Extra Low
Voltage).
2
0.5 mm
to 1.5 mm
Use a category 5 or 5e shielded network cable (connect the
cable shielding to the host terminal block provided)
10 000 max
10 years
Proximity 125 kHz STID/HID
4 cm
10/100 Mb/s
© 2013 Bodet Software. All rights reserved.
Features
, 50/60 Hz 100-65 mA)
AC
50 Hz/60 Hz 1 A maximum.
AC
2
cross section, stripped over 5 mm
Proximity 13.56 MHz
4 cm
Hide quick links:
Advertisement
Table of Contents
