American Standard Monterrey 6403 Series Installation Instructions

BOTTOM MOUNT
KITCHEN FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.

Recommended tools

Screwdriver
1

INSTALL VALVE ASSEMBLIES

Install LOCKNUTS (1, 1a), BRASS WASHERS (2) and RUBBER WASHERS
(3, 3a) onto valve and center shanks.
Install FERRULE (4) into COUPLING NUT (5). Thread onto VALVE (6, 6a) and
loosely tighten COUPLING NUTS (5).
Push TUBING (7) ends into VALVES (6, 6a) side outlets. Insert VALVES (6, 6a)
into mounting holes from underside of ledge.
Place RUBBER RING (8) into ESCUTCHEON (9) and thread onto VALVES (6, 6a)
until snug against internal stop.
Place SPOUT RUBBER RING (10) into SPOUT BASE (11) and thread onto VALVE
SHANK (12) and tighten.
Tighten LOCKNUT (1, 1a) to secure VALVES (6, 6a) into position.
Firmly tighten COUPLING NUTS (5).
Connect HOT water supply to inlet of left VALVE and COLD water supply to inlet of
right VALVE using appropriate connector.
5/16" MIN.
2

INSTALL HANDLES

Turn VALVES (1) to off position.
Insert ADAPTOR (7) with larger diameter over the VALVE STEM (4).
Align LEVER (2) or WRIST BLADE HANDLE (3) and install onto VALVE STEM (4).
Insert BLUE INDEX (5) into cold valve (right side) and red INDEX (6) into hot valve (left side).
Insert HANDLE SCREW (6) into HANDLES and tighten with screwdriver.
Channel Locks
CAUTION
9
8
6
MOUNTING SURFACE
3
2
1
Installation
Instructions
6403 Series
6404 Series
Adjustable Wrench
Turn off water at
main supply.
9
8
3
2
1
HOT
Certified to comply with ANSI A112.18.1M
M 9 6 5 7 1 9 ( 1 0 / 1 5 )
Tubing Cutter
11
10
9
8
MOUNTING
LEDGE
3a
6
4
3
5
1a
5
4
7
COLD
1
6a
6
5
2
3
7
4