American Standard MAYBROOK 6581 Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS
MAYBROOK
®
6581 SERIES
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
BEFORE YOU BEGIN
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer's instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
RECOMMENDED TOOLS AND MATERIALS
Safety Glasses Tape Measure
Thread Sealant 1/4" Ratchet
(11-1/2")
457mm
(18")
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a I n c .
© A S A m e r i c a I n c . 2 0 1 5
URINAL
Adjustable Wrench
Hole Cutting Equipment
121mm
(4-3/4")
292mm
324mm
(12-3/4")
298mm
(11-3/4")
10mm (3/8")
D. HOLES
38mm (1-1/2")
O.D. WASTE
Blade Screwdriver
19mm (3/4") N.P.T. OR C.W.T.
SUPPLY TO FLUSH VALVE
K-2
HANGER
298mm
(11-3/4")
133mm
(5-1/4")
292mm
(11-1/2")
171mm
610mm
(6-3/4")
(24 " )
32mm
OPTIONAL
(1-1/4")
TO FINISHED
*
SUGGESTED
FLOOR
38mm (1-1/2")
O.D. TAILPIECE
Pencil Levels
FINISHED WALL
64mm
(2-1/2")
19mm (3/4")
SPUD
324mm
(12-3/4")
178mm
(7")
* P-TRAP SOLD
SEPARATELY
73 01812 -10 0