Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 14 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the screw hole on the power-adapter port with the screw hole on the palm rest and keyboard assembly and snap it into place.
2. Replace the (M2x3) screw that secures the power-adapter port to the palm rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm rest and keyboard assembly.
Post-requisites
1. Replace the display assembly.
2. Replace the system board.
3. Follow the procedure from step 4 to step 5 in
4. Replace the solid-state drive.
5. Replace the heat-sink assembly (for computer with discrete graphics
6. Replace the heat sink (for computer with integrated graphics
7. Replace the fan (for computer with integrated graphics
8. Replace the wireless card.
9. Replace the memory module.
10. Replace the battery.
11. Replace the base cover.

Replacing the power-adapter port

computer. After working inside your computer, follow the instructions in
"Replacing the hard
card).
card).
drive".
card).
Replacing the power-adapter port
36
After
53