Dell Inspiron 14 7000 Service Manual page 61

General-System Information
Core Count
Processor ID
Current Clock Speed
Minimum Clock Speed
Maximum Clock Speed
Processor L2 Cache
Processor L3 Cache
HT Capable
64-Bit Technology
Battery Information
Boot Sequence
Boot Sequence
Boot List Option
Advanced Boot Options
Enable Legacy Option ROMs
Enable UEFI Network Stack
Date/Time
Table 4. System setup options—System Configuration menu
System Configuration
SATA Operation
Drives
SMART Reporting
USB Configuration
Enable Boot Support
Enable External USB Port
USB PowerShare
Audio
Miscellaneous Devices
Enable Camera
Enable Secure Digital (SD) Card
Table 5. System setup options—Video menu
Video
LCD Brightness
Table 6. System setup options—Security menu
Security
Admin Password
System Password
Displays the number of cores on the processor.
Displays the processor identification code.
Displays the current processor clock speed.
Displays the minimum processor clock speed.
Displays the maximum processor clock speed.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays whether the processor is HyperThreading (HT) capable.
Displays whether 64-bit technology is used.
Displays the battery health information.
Displays the boot sequence.
Displays the available boot options.
Enable or disable the Legacy Option ROMs.
Enable or disable UEFI Network Stack.
Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Configure operating mode of the integrated SATA hard drive controller.
Enable or disable various drives on board.
Enable or disable SMART Reporting during system startup.
Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Enable or disable booting from USB mass storage devices connected to external USB
port.
Enable or disable charging external devices through the USB PowerShare port.
Enable or disable the integrated audio controller.
Enable or disable various onboard devices.
Enable or disable the camera.
Enable or disable the SD card.
Set the panel brightness independently for Battery and AC power.
Set, change, or delete the administrator password.
Set, change, or delete the system password.
System setup 61