Adjusting The Receiver / Recorder Configuration - THOMSON DTH8555 X User Manual

2_DTH8555 X_en.qxd

Adjusting the receiver / recorder configuration

1. Switch on your TV set, your DVD recorder, then your satellite or cable receiver.
2. Place the receiver on channel 002.
With your DVD recorder's remote control, carry out the following settings:
3. If the main menu is not displayed, press the
4.
Select the Setup line using the
5.
Select the Installation line using the
The Interactive setup line is already selected. Press
6.
Choose a display language for the following screens.
7.
Select your country of residence using the
The Automatic line is already highlighted, press
The screen which appears is a set-up screen for the allocation of input terminals
8.
If you connected your devices as indicated on page 8, check that AV2-SAT -CABL has been
allocated to Satellite Receiver, or Cable Receiver otherwise change the allocation using
the B key.
9.
Then select the line Done and press
Press .
OK
From now on, follow on-screen instructions appearing in the various windows. If need be,
refer to the additional explanations given below.
18/08/05 10:15 Page 9
Connections and initial set up
L M
or
L
OK
key on the remote control.
MENU
keys, and press OK to validate.
M
or keys, and press OK
OK .
L M
or keys, and press
.
OK
Note: Cable Receiver or Satellite Receiver: to
connect with a satellite or cable receiver terminal on the AV2
socket of your DVD recorder (connection shown on page 8).
The other settings are explained on page 6.
.
Note: an installation window will appear. A cursor shows the
progress in the set-up of the channels. When all the channels
that you can receive in your area have been stored, 100 % is
indicated.
9
to validate.
.
OK
EN
EN