Table of Contents
Advertisement
2_DTH8555 X_en.qxd
Recording functions
Recording from a connected device
Your DVD recorder allows you to record TV programmes (satellite or cable) or to copy video
sequences from a connected device.
From a satellite receiver or cable receiver (AV2 socket)
1.
To record to disc, load a DVD+R or DVD+RW disc into the DVD recorder.
2.
From the Main Menu and with the Watch TV function selected, press
last channel watched appear.The information banner is displayed for several seconds.
3.
Select the AV2 connector of the DVD recorder using the
so that AV2-SAT -CABL is displayed in the banner and on (
recorder.
4.
Record by pressing the
5.
Stop the recording by pressing twice on the
From a Camcorder or other device (AV3, AV4 socket)
Your DVD recorder has both RCA Audio-Video and Ushiden sockets for the transfer of video to
a recordable disc.
1.
To record to disc, load a DVD+R or DVD+RW disc into the DVD recorder.
2.
Place the device in its play mode.
3.
From the Main Menu and with the Watch TV function selected, press
last channel watched appear.The information banner is displayed for several seconds.
4.
Using the
AV
the AV3 connector if your camcorder is connected to the front of your DVD recorder, or
AV4 if it is connected to the S-VIDEO IN connectors or COMPOSITE INPUT at the
rear of the machine.
5.
Record by pressing the
6.
Stop the recording by pressing twice on the
Note: you can copy films in a single pass without concerning yourself about the content since the Split
Title function will afterwards allow you to isolate and then delete any unwanted sequences.You can also
create titles of your choice. Refer to page 48.
18/08/05
10:15
Page 34
REC
(
RECORD
) key on the remote control or on the facade.
button of the remote control while the information banner is displayed, select
key on the remote control or on the facade.
REC
button on the remote control,
AV
LIVE AV2
) display of the DVD
STOP
key.
key.
STOP
34
OK
.The images of the
.The images of the
OK
Advertisement
Table of Contents
