Recording Functions; To Watch Tv Programmes; To Change Channel - THOMSON DTH8555 X User Manual

2_DTH8555 X_en.qxd

Recording functions

To watch TV Programmes

1.
Turn on your TV set.
2.
Turn on your DVD recorder using the
recorder is replaced by the word
• After a few seconds the main menu of the set appears on the television screen.
• The Watch TV function is already selected.
3. Press the
OK
• The images of the last watched channel appear.
• Encrusted within the image for a few seconds is information on the current channel and
programme.This disappears after several seconds.
Note: when the information banner is displayed at the top of the screen you have the possibility of choosing
an audio channel (if this is provided by the channel) using the
To display information again, press the

To change channel

Change the channel with the
channel of a device connected to your DVD recorder (satellite reciever) or to view images from
a video recorder, use the
times to select one of the three connectors (AV1, AV2, AV3) to which the device is connected.
Note: where needed, see the connection diagrams on pages 14 and 15.
of the channel selected
on the DVD recorder
Current time
Note: NICAM sound is digital, compatible with analogue tv sets. It is broadcast by certain channels and
relayed by certain emmiters in some European countries. NICAM (Near Instantaneously Companded Audio
Multiplex) is also used to broadcast Dolby Surround stereophonic programmes or for simultaneous
broadcasting in two languages or for two different sounds (intended for blind and poorly sighted people).
18/08/05 10:15 Page 26
ON/STANDBY.
MENU
Note: turn off non used devices to avoid problems of selecting
sockets or other types.
If the main menu of the player is not displayed on the television
screen, check and/or select the Scart socket to which you
connected your DVD recorder (see page 4 - AV1 selection).
Generally the selection is carried out using the AV key on the
television set remote control.
If the THOMSON logo temporarily appears, it is because the
screen saver has been triggered ; press the
display the menu
key of the remote control or one of the
key of the remote control.
INFO
PR+/PR- - key or the remote control number keys.To select the
button on the remote control or press the
AV
No. and name
Indications concerning the channel sound and the selection of audio
channels. Selection is possible with the
The time displayed on your DVD
.
, keys on the front panel.
PR+/PR-
B
key on the remote control.
26
button to
OK
PR+/PR- button several
B
key on the remote control.