Reinstalling Channels (Updating); Sorting Channels - THOMSON DTH8555 X User Manual

2_DTH8555 X_en.qxd

Reinstalling channels (updating)

If new channels make their way into the audiovisual scene, you will have to update your DVD
recorder's list of channels. In such a case, start a new channel search from the installation menu.
This set-up deletes all stored channels and resets all the channels that your DVD recorder can
receive. If you only want to set-up a single channel, refer to the manual search on page 12.
1.
If the main menu is not displayed, press the
2.
Select the Setup line using the
3. Select the Installation line using the
4. Select the Channel search line using the

Sorting channels

1.
If the Main Menu is not displayed, press the
2. Select the Setup line using the
3. Select the Installation line using the
4. Select the Channel List line using the
Channel Sorting paragraph to check or sort out the channels stored on your DVD
recorder.
18/08/05 10:15 Page 13
Connections and initial set up
L M
or
L
L M
or
L
MENU key on the remote control.
keys, and press OK to validate.
M
or keys, and press
OK
L M
or keys, and press
An installation window will appear. A cursor shows the
progress in the set-up of the channels.When all the
channels that you can receive in your area have been
stored, 100 % is indicated. Press
line. Press
Channel search
Main Menu.
MENU key.
keys, and press to validate.
OK
M
or keys, and press
OK
L M
or keys, and press
OK
13
to validate.
to validate.
OK
to return to the
OK
to return to the
MENU
to validate.
to validate. Refer to the
EN
EN