Table of Contents
Advertisement
2_DTH8555 X_en.qxd
Sorting the channels
11.
A window for classifying the channels appears with the images of the selected channel.
The automatic channel search has assigned numbers to the channels in a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
12.
When all channels have been sorted to your liking, press the
13.
Your DVD recorder has an automatic time (and date) setting function. In general, no setting is
required on your part. If the time and date information are correct, select Done by pressing
several times.A message appears. It indicates that the installation of the channels are now
OK
complete. Press
Clock setting
AutoClock:
If the time and date are incorrect, adjust the clock as described below, check that
automatic time updating is activated.The time setting of the DVD recorder is important for the
correct functioning of your programmed recordings.
Note:You can now use your DVD recorder and take advantage of its numerous functions. If you want to
connect a satellite receiver to your DVD recorder, refer to page 14 for the recommended connection.You can
also complete your installation through the settings available in the System Options menu (refer to
pages 64-65). These adjustments depend on the other devices that you are likely to connect to your DVD
recorder.
If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).
18/08/05
10:15
Page 7
Connections and initial set up
Note: Channel sorting instructions:
Move: press
the desired position (Pr no. on the left of the list then
swapping of the 2 channels).
Delete:
Rename:
choose a name letter by letter in the list. Validate by pressing
Decoder adjustment:
selected channel will be decrypted by a decoder, of the
C
ANAL
decoder displayed alongside the name of the channel confirms
the adjustment).
.The main menu of your DVD recorder appears.
OK
1.
2.
3.
4.
C
B,
(then the
,
OK
key.
EXIT
key then in the grid,
INFO
key (indicates that the images of the
AV
+ type, connected to connector
STOP
Select Year. Enter the year's 4 digits (press 2
for 2005).
Then enter the 4 digits of the date (press 1
15th May).
Enter the 4 digits of the time
(press 1
1
0
6 for 11:06). Press B to display Yes for
,
,
,
the auto clock.
Then press twice on
The Main Menu will appear
OK.
again. Channel set-up is complete.
7
M
L
or
keys until you reach
:
OK
M
L
C
B,
,
or
keys to
OK
.The symbol of a
AV2
key.
,
0
,
0
,
5
,
5
,
0
,
5 for
EN
EN
.
Advertisement
Table of Contents
