Speakers; System Audio Quality; Speaker Setting Principle - THOMSON IB5400GB Owner's Manual

Thomson multimedia dvd player owner manual
Table of Contents

Advertisement

IB5400GB
3/09/01 16:14
S
peakers
Speaker setting is required only if you use the 6 RCA phono sockets on the rear of the DVD player.
In that case, the Dolby Digital / MPEG-2 decoder sends a decoded 5.1 signal to the amplifier (for
further information, refer to page 10). Speaker setting is required only at installation.

System audio quality

Depending on the amplifier and connected speakers, confirm your set-up with the menu below.
This interactive menu page allows you to,
• Select the speakers you have connected.
• Adjust their audio volume and respective delay.
• Configure all the decoding values for the Dolby Digital and multichannel MPEG 2 audio for your

speakers.

• Display the room with the position and number of speakers (including the subwoofer).
• Choose the size and quality of your speakers by clicking twice on each speaker (function available
for Dolby Digital DVD discs only).
• Adjust the delay between the front and surround speakers, and for the central speaker according to
its position compared to the front speakers.
• Test the setting by running a test sound ("pink noise").
If you do not have the 5 recommended speakers (+1: the Subwoofer) for multichannel surround
sound,
• Click twice on the icon corresponding to your missing speakers (subwoofer and/or surround
speakers): they disappear from the screen. Multichannel sound will now be distributed across the
remaining speakers. As you purchase more speakers, you can re-activate them one by one.

Speaker setting principle

From the "AUDIO OPTIONS" menu you can access all
the settings. Follow these intructions:
1.
Move to the items and press
and select the value to be adjusted and press
ok
(15) to confirm.
2.
To save your settings when you have finished,
return
press
settings are restored.)
26
Page 26
ok
(15) to confirm
key (20). (Otherwise, all the original
Centre
Large/Small/None
Center
Center
Distance
Volume
Front (L)
Front (R)
Large/Small
Large/Small
Surround (L/R)
SPEAKER SETUP
Delay time
0
0
dB
cm
0
Test
dB
0
0
0
cm
dB
dB
RETURN ¹ ¹
à à ¨ ¨
Surround (L)
Surround (R)
Large/Small/None
Large/Small/None
Surround (L/R)
Distance / volume
Underlined item is the factory setting.
Subwoofer
Yes/No
OK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dth5400 - annexe 1

Table of Contents