Xiaomi Mi Electric Scooter M365 User Manual page 17

Adjusting the disc brake
If the brake is too tight, use the M4 hexagon wrench to loosen the screws on the caliper, and
slightly send back the brake cable to shorten the exposed length, then tighten the screws. If
the brake is too loose, loosen the screws, and slightly pull out the brake cable to lengthen the
exposed length, then tighten the screws.
Adjust the handlebar
If the handlebar and its stem sway during riding, use the M5 hexagon wrench to tighten the
screws on the folding mechanism.
How to use the extended nozzle adapter
If your tires are flat, remove the screw-on cap from the valve, and connect the extended nozzle
adapter to the valve for pumping up.
This version is for private use only and should not be distributed.
16
Brake Cable