THOMSON DPL953REC Owner's Manual page 10

DPL953REC_EN 17/11/05
Connections and Setup
EN
8:58 Page 10
5. To move a channel, use the
select the channel you wish to move.Then select the
Move to option and press
and
store the channel in and press
will move to the new position.
6.
Use the Enable/Disable option to include the
selected channel in the channel loop.To do so, select
the channel using the
Enable/Disable and press
7. Press
Manual installation
1. Press the
option using the
ENTER
2.
Select the Modify Channel option using the
Modify Channel
3.
Select the channel to modify using the
Add Channel
buttons and press
Fine Tune
4.
To add a channel, select Add Channel and press
Delete Channel
Decoder In : OFF
ENTER
The channel can be fine tuned to improve picture
Done
quality. Select Fine Tune and use the
buttons to adjust the picture. Select Done and press
ENTER
To delete a channel, select Delete Channel and
press
If the channel is encoded (and a decoder is connected
to the DVD recorder), select the Decoder In option
and press
option.
5.
Once all settings are completed, select Done and
press
ENTER
buttons to reach the position you wish to
and
ENTER
to leave the menu.
SETUP
button. Select the TV Tuner
SETUP
and buttons and press
.
buttons and press or
ENTER
to access the sub-menu.
.
when you are finished.
ENTER .
to activate or deactivate the
ENTER
.
ENTER
10
and buttons to
.Then use the
ENTER .The channel
buttons, select
.
or
and
.
and
and