Specifications; Spezifikationen - Hammer Rower Cobra XTR Manual

Table of Contents

Advertisement

5.4 Spezifikationen

SPM: aktuelle Ruderfrequenz in minuten: 0~999.
TIME/500M: aktuelle Zeit für eine Distnaz von 500m Range: 00:
00~99:59.
TIME: Zeitanzeige: 0:00~99:59. Voreingestellte Zeit beträgt 5:00~99:
00. Der Computer startet von der voreingestellten Zeit rückwärts bis 0 zu
laufen. Das Programm stoppt automatisch und es ertönt der Alarm.
DIST:
Kilometeranzeige:
0.5~99.5. Wenn die Distanz 0 erreicht, ertönt der Alarm und das
Programm stoppt.
CALORIE: Kalorienanzeige: 0.0~999. Voreingestellte Kalorienanzeige:
10.0~990. Wenn die Kalorien 0 erreicht, ertönt der Alarm und das
Programm stoppt.
PULSE: Pulsanzeige: 30~240BPM (Schläge pro Minute)
RESISTANCE LEVEL: Zeigt die Widerstandsstufe von:1~16
FEHLERMELDUNG
1.Kommt folgende Meldung ERROR1, bitte den Motor überprüfen und ob
das Kabel richtig angeschlossen ist.
ADAPTER
INPUT: AC (Länderabhängig)
OUTPUT: 8VDC 500mA
0.0~99.9KM.
Voreingestellte

5.4 Specifications

SPM: showing the current rowing frequency per minute. Range:
0~999.
TIME/500M: Display time for distance of 500m under current
frequency. Range: 00:00~99:59.
TIME: the accumulative exercise time, range: 0:00~99:59.
Preset time range is 5:00~99:00. The computer will start to
count down from preset time to 0:00 with average time for each
resistance level. When it reaches to zero,the program will stop and
computer alarm.If you do not preset the time, it will run with one
minute decrement each resistance level.
DIST:
the
Entfernung:
0.0~99.9KM(MILE) the preset distance range: 0.5~99.5. When
the distance reaches 0, the program will stop and the computer
will alarm.
CALORIE: the exercise accumulative calories burnt. Range: 0.0
~999 the preset calories range: 10.0~990. When the calorie
reaches 0, the program will stop and the computer will alarm.
PULSE: showing the exercise heart rate value. Range: 30~
240BPM (beat per minute)
RESISTANCE LEVEL: showing resistance level. Range:1~16
BREAKDOWN DISPLAY
1.When the computer displays ERROR1, please check if the motor
is good and if the motor wires connect well.
ADAPTOR
INPUT: AC (The voltage depends on different country)
OUTPUT: 8VDC 500mA
18
exercise
accumulative
distance.
Range:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents