Display Backlight On/Off States - Mitsubishi MELSEC-A Series Operating Manual

5.
Q,PERATING PROCEDURES
MELSEGA
5.3 Dlsplay Adjustments and Dlsplay Format
This section explains how to adjust the display and the display format of the
A8PUE.
The position where each character is shown on the display is indicated by the dotted lines in
the display explanations given below.
Dotted lines are for explanatory
- - - - - - -
I I I I I
purposes only.
After starting up the A8PUE, the brightness of the display can be adjusted by
turning the brightness adjustment thumbwheel on the left side
of
the unit.
Adjust as necessary.
5.3.2 Display backlight OWOFF
stater,
The backlight is ON/OFF in the following cases:
When the backlight is ON, perform operations as necessary.
(1) Goes ON
When the A8PUE is started up
When starting/restarting key inputting
(2)
Goes OFF
If a key is not input for 10 minutes or more
5 - 10