Fortinet FortiManager-100 Quick Start Manual

LED State
Green
Power
Off
Amber
Flashing
All Ports
Green
Off
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation - http://docs.fortinet.com
• Fortinet Knowledge Center - http://kb.fortinet.com
• Fortinet Technical Support - http://support.fortinet.com
• Training Services - http://campus.training.fortinet.com
Package Contents
Connector Type
Port 1 RJ-45
Ports 2,3,4 RJ-45
CONSOLE DB-9
Power LED
DC+12V
Power
RS-232 Serial
Connection
Connection
Connecting
Connect the following to the FortiManager system. Ensure the FortiManager system is placed on a stable surface.
for cooling.
• Connect the network cable to interface 1.
• Connect the AC Power Cord to the Power Supply.
• Connect the Power Cord to a surge protected power bar or power supply.
Power cable connects
Optional null modem cable connects to
serial port on management computer.
Configuration Tools
Web-based manager
The FortiManager web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
• An Ethernet connection between the FortiManager system and management computer.
• A web browser such as FireFox 2.0 and higher or Internet Explorer 6.0 and higher on
the management computer.
Description
The FortiManager Server unit is powered on.
The FortiManager Server unit is powered off.
The correct cable is in use and the connected equip-
ment has power.
Network activity at this interface.
The interface is connected at 100 Mbps.
No link established.
Speed Protocol
10/100 Base-T Ethernet
10/100 Base-T Ethernet
9600 bps RS-232 serial
Front
1 2 3 4
10/100
POWER
LINK / ACT
STATUS
Interface
Status LED
status LEDs
USB
4 3 2 1
USB
(future)
Internal Interface,
switch connectors
1,2,3,4
Back
DC+12V
to power supply.
QuickStart Guide
© Copyright 2009 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
27 October 2009
Description
Connection to the network
For future use.
Optional connection to the management computer. Provides access to the command line interface (CLI).
Tools and Documenation
Power Supply
It requires 1.5 inches (3.75 cm) clearance above and on each side to allow
USB
4 3 2 1
Straight-through Ethernet cable connects
to hub or switch on the network.
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD-ROM.
Requirements:
• The DB9 serial connection between the FortiManager system and management com-
puter.
• A terminal emulation application (HyperTerminal for Windows) on the management
computer.
1
POWER
STATUS
02-40000-112746-20091027
QuickStart Guide
FortiGate-30B
1 2 3 4
10/100
POWER
STATUS LINK / ACT
Copyright 2008 Fortinet Incorporated. All rights reserved. REGISTER
Trademarks
Straight-through
Ethernet cable
Crossover
Power Cable
Ethernet cable
FortiManager-100
2 3 4
10/100
LINK / ACT
Null Modem Cable
(RS-232)