Fortinet FortiManager-3000B Quick Start Manual

Light Icon Description
The light flashes orange when packets are sent and received on
the Ethernet port 1 and 2.
Power indicator is blue when the FortiManager system is on.
The light flashes blue when reading the boot device.
Hard Disk Upper LED Blue when the hard disk is properly inserted into the drive bay
and the FortiManager is plugged in to a power source.
Flashes blue when reading and writing to the hard disk.
Hard Disk Lower LED
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation - http://docs.forticare.com
• Fortinet Knowledge Center - http://kc.forticare.com
• Fortinet Technical Support - http://support.fortinet.com
Package Contents
Power Suppy Alarm Reset Button
DB9 Serial
Power
connection
connections
USB for
future use
Connecting
Connect the following to the FortiManager system. Ensure the FortiManager system is
placed on a stable surface or securely mounted in a 19" rack.
• Insert the hard disks included in the FortiManager package into the bays of the
FortiManager unit, starting in bay 1. Use the diagram on the front panel as a guide.
• Insert a network cable to port 1. Insert the other end to the router or switch connected
to the network.
• Connect one power chord to a power supply. Connect the other power cord to an
alternate power source if available.
• Connect the Power Cord to a surge protected power bar or power supply.
• Press the Power button to turn on the FortiManager unit.
• The power LED appears blue and the hard disk icon LED flashes blue while the system
boots.
•
• For more information, see the FortiManager Install Guide.
Configuration Tools
Web-based manager
The FortiManager web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
• An Ethernet connection between the FortiManager system and management computer.
• A web browser such as FireFox 2.0 and higher or Internet Explorer 6.0 and higher on
the management computer.
Front
LED Indicators
Power Button
Hardware Reset Button
PS RST
2 1
DISK DRIVE LEGEND POWER
ACTIVITY
HDD 1 (P0) HDD 2 (P1)
HDD 3 (P2) HDD 4 (P3)
EMPTY EMPTY
USB (Behind front panel)
Back
Ethernet
Ethernet
connections
connections
QuickStart Guide
© Copyright 2008 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
28 March 2008
Connector Type Speed
Port 1 to 4 RJ-45 100/1000
Base-T
CONSOLE DB9 9600 bps
8/N/1
USB USB
®
Straight-through
DB-9 Serial Cable
and cross over
Ethernet cables
Power Cables
Null modem cable connects
to serial port on management
computer.
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD-ROM.
Requirements:
• The DB9 serial connection between the FortiManager system and management com-
puter.
• A terminal emulation application (HyperTerminal for Windows) on the management
computer.
PS RST
2 1
DISK DRIVE LEGEND POWER
ACTIVITY
HDD 1 (P0) HDD 2 (P1)
HDD 3 (P2) HDD 4 (P3)
EMPTY EMPTY
02-30006-462-20080328
Protocol Description
Ethernet Connection to the internal network.
RS-232 Optional connection to the management computer.
serial Provides access to the command line interface.
USB For future use.
QuickStart Guide
Tools and Documenation
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.

Power connections

Straight-through Ethernet
cable connects to hub or
switch on the network.
FortiManager-3000B
FortiManager-3000B
PS RST
2 1
DISK DRIVE LEGEND POWER
ACTIVITY
HDD 1 (P0) HDD 3 (P2)
HDD 2 (P1) HDD 4 (P3)
Welcome | Bienvenue | Willkommen | ?迎 | 歓迎 | Bienvenido | Benvenuto
4 hot-swappable
hard disks