Operating Determinations - Omnitronic UA-1000 User Manual

3. OPERATING DETERMINATIONS

The antenna distributor UA-1000 is designed for operating up to four receivers DR-1000. It will make it
easier to set up a wireless system by replaces the respective antennas and PSUs of the individual receivers.
Matching connection cables are included. The antenna distributor can also be used in connection with the
antenna boosters AB-1000. Via the antenna inputs, it supplies power to the antenna boosters.
This product is allowed to be operated with an alternating current of 90-260 V AC, 50-60 Hz ~ and was
designed for indoor use only.
Never remove the serial barcode from the devices as this would void the guarantee.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
The ambient contamination must never exceed level 1 and must not be conducting, only dry.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, hearing loss etc.
18/23 00052269.DOC, Version 1.2