Operation; Technical Data - auna Areal Bar 950 Manual

1 . Firstly, plug the subwoofer & sound bar adaptor to the unit and external socket, then switch on the
woofer unit .
2 . The default mode is Standby function, press power button on the remote control or any touch but-
ton on the Sound bar to enter working status .
3 . Press subwoofer & soundbar „MFB"button about 15sec, WL led light will fast flash, when lights
stopped flashing and turn bright, the woofer and soundbar connected, also, turn on unit next time,
it will connect automatically .
4 . Use one set audio cable to connect external audio source (mobile, mp3), led light colour will turn
purple .
5 . Press 13--button exchange to USS/OPTICAL mode,in USS mode, led light will turn slow flash red
colour. In Optical mode, led light will turn fast flash purple colour.
6 . Press C3- button exchange to BT mode, light turn blue and flash slowly,open mobile phone,search
BT name Areal Bar 950, light turn bright when connected .
12

Operation

Technical Data

Item number 10030851
Power source 220-240 V~ 50/60 Hz
Power consumption 60 W
S/N ≤80 dB
Speaker Impedance 4 Ohm