Table of Contents
Advertisement
8.0 Temperature Mode - Display
• To view temperature mode, press the [m]
button until the mode indicator displays T.
• In temperature mode the watch will
display temperatures in the top row and
home time, temperature, or run counter
in the bottom row.
8.1 Temperature Mode - Setting
• In temperature mode, press and hold the
[s/+] button for 2 seconds. The ˚F or ˚C indicator will flash.
• Press the [o/-] button to select between ˚F or ˚C.
• Press the [o/o] button to confirm selection.
• At this time the bottom row will flash.
• Press the [o/-] button to select between home time, temperature,
or run counter to be displayed in the bottom row. Press the [o/o]
button to confirm selection.
8.2 Temperature Mode - Temperature Features
Current, Maximum, and Minimum Temperatures:
• In temperature mode, press the [o/-] button to access the
maximum temperature reading since the setting was last reset.
• Press the [o/-] button again to access the minimum temperature
reading since the setting was last reset.
• Both maximum and minimum temperature readings can be reset by
pressing and holding the [s/+] button for 2 seconds while viewing
either the maximum or minimum records respectively.
• Surrounding temperatures are generally 10 - 15˚F / 5 - 8˚C
cooler than watch readings due to the effects of the wearer's body
temperature.
• For more accurate readings, remove the watch from your wrist and
allow 5-10 minutes for sensors to adjust.
9.0 Altimeter Mode - Display
In altitude mode the watch will display
altitude and barometric measurements
in the top row and the current home
time, current temperature, or run counter
depending our your personal selection.
• To view Altimeter Mode, press the
[m] button until the mode indicator
displays A.
14
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Alti-Ski and is the answer not in the manual?
Questions and answers