Tech4o NORTHSTAR CW3 Instruction Manual

NORTHSTAR CW3
CW3 Features:
Congratulations on the purchase of your Tech4o NorthStar CW3. Please read these
instructions and save for future reference. Developed with advanced sensor technology,
this watch provides:
• analog and digital timekeeping
• digital compass
• digital calendar
For best performance, we
recommend that you:
• Avoid exposing the watch to
extreme conditions for extended
periods
• Avoid rough use or severe impacts
• Clean with a soft damp cloth
• Keep watch away from magnetic
fields such as mobile phones,
speakers and motors
• Store in a dry place
Digital Features:
TIME [ T ] Selects the display and settings - current time (hour, minute)
COMP [ C ] Selects/sets the compass mode
DAY [ DY ] Selects/sets the day of week
DATE [ DT ] Selects/sets date
Digital Functions: Major Function Map
2 sec
Date
[DT]
[ T ]
Time
2 sec
[ T ]
Seconds
Set the Analog Watch
• Gently pull the crown out
until it clicks
• Turn the crown in either
direction until you to reach
correct time
• Push the crown back to its
original position on the case
Hour Hand Minute Hand
DATE
TIME
Seconds Hand
current time (seconds)
Arrow
10 sec
Compass Mode
[C]
[DY]
Analog Mode
2 sec
Day of the Week
Set Time
Digital Display
When in the analog mode, you
can easily activate the digital
display
• Press [ T ] to enter the
digital time display
• Press [ T ] again for the
digital seconds display
• After 2 seconds the display
will revert to analog
Set Digital Time,
Calendar and Format:
COMP
• In the Time or Seconds
display, Press and Hold [ T ]
for 2 seconds until the
Crown
"seconds" digits flash
• Press [ C ] to navigate to
the setting that you wish to
DAY
change. See navigation
chart at right
• When the setting you wish to change flashes, Press [ DY ] to raise the
value. Note: If you Press and Hold the button, the rate of change is faster
• When in "Seconds" mode, Press [ DY ] to reset seconds to zero
• Press [ DY ] to switch between formats ( time, Date )
• When setting is complete, Press [ DT ] to confirm and return to the
previous display
Digital Date
When in the analog mode,
Press [ DT ] to activate the
Date display. It will display
for 2 seconds
Digital Day of Week
When in the analog mode,
Press [ DY ] to activate the
Day of Week. It will display
for 2 seconds
Digital Compass Watch
Caution: Accurate readings will be
compromised when used near
magnetic fields, mobile phones,
speakers, motors, electrical appliances
and inside a moving vehicle or a
ferroconcrete building.
Click Watch may need to be calibrated for
declination
Perform calibration when:
• First time of use
• Declination angle has changed
• The battery has been replaced
12 Hour Format
[ T ]
Current Time
[ T ]
Time
Hold [ T ]
Second
[DY]
[C]
Increase
Number
Minute
[C]
Increase
Number
Hour
Faster
[C]
Hold [DY]
[C]
Year
Month Day
Sunday Monday
Tuesday
Thursday Friday
24 Hour Format
Current Seconds
Seconds
Press [ DT ]
or 1 Min.
Time
Format
[C]
Date
Format
[C]
Date
[C]
Month
Day Month
Wednesday
Saturday
Day of Week
Direction
of Travel