DSC SKYROUTE max Quick Install Manual page 3

SKYROUTE MA
IMPORTANT IMPORTANT : You must be enrolled with CONNECT 24 to activate a Skyroute max Transceiver. If you are : You must be enrolled with CONNECT 24 to activate a Skyroute max Transceiver. If you are
IMPORTANT IMPORTANT IMPORTANT: You must be enrolled with CONNECT 24 to activate a Skyroute max Transceiver. If you are : You must be enrolled with CONNECT 24 to activate a Skyroute max Transceiver. If you are : You must be enrolled with CONNECT 24 to activate a Skyroute max Transceiver. If you are
not already enrolled, please call 1-888-955-5583 at least 24 hours prior to your first activation. not already enrolled, please call 1-888-955-5583 at least 24 hours prior to your first activation. not already enrolled, please call 1-888-955-5583 at least 24 hours prior to your first activation.
not already enrolled, please call 1-888-955-5583 at least 24 hours prior to your first activation. not already enrolled, please call 1-888-955-5583 at least 24 hours prior to your first activation.
STEP 1 – DETERMINE BEST SIGNAL LOCATION
Connect the Skyroute max to a 7 Ah battery, as described in Section 6.1. Determine the best location for signal strength. If
good signal strength cannot be found, an antenna extension or relocation may be required.
NOTE: In the US both Side A and Side B carriers may be used. Changes can be made in option [006] (see Section 8.1) of
the Skyroute programming.
STEP 2 – CONNECT THE SKYROUTE MA
• Mount and connect the Skyroute max to the control panel as shown in Section 6.13.
• Enroll Skyroute max onto the system (See section 6.15)
STEP 3 – PROGRAM THE SKYROUTE MA
Enter *8 + Installer Code to enter Programming Mode. Go to section [00][18], and program the following sections:
DEFAULT THE SKYROUTE MAX
Select the Default option as described in Section 7.1 of this manual:
• For FULL REPORTING...................enter 00 into Section [099]
• For GENERIC REPORTING..............enter 22 into Section [099]
The Skyroute max will automatically restart, and default to the new setting.
SELECT THE CELLULAR CHANNEL - Section [006]
The Skyroute max is defaulted for Channel B. If you require Channel A (see the SID List for the channel of the Cellular
Service Provider in your area), perform the following:
• In Section [006], TURN OFF OPTION 2, and TURN ON OPTION 1 (Press # to exit section [006])
SELECT TEST TRANSMISSION TIME - Sections [010], [011], and [013]
• In Section [10], enter the transmission time-of-day in 24-hour format (HHMM).
NOTE: Due to the volume of wireless traffic generated by test signals, please select a time which is NOT on the :30
minute marks (i.e. NOT NOT NOT 02:30, 04:00, etc. Select a time like 02:24, or 04:07, etc. wherever possible. NOT NOT
• In Section [11], select the transmission day-of-the-week.
NOTE: This section is not to be used for UL Listed applications.
• In Section [13], select Daily or Weekly testing as required.
NOTE: Select this option in conjunction with the CONNECT 24 Rate Plan you are using for this installation. The default
setting is Weekly. For UL Listed applications Daily test reports are required.
STEP 4 – ACTIVATE THE SKYROUTE MA
Call the Voice Response Unit (VRU) at the toll free number provided with your Dealer Confirmation.
Y Y Y Y Y OUR SK OUR SK OUR SK
OUR SKYROUTE MA OUR SK
ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL. ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL. ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL. ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
MA MA MA X X X X X – QUICK INSTALL GUIDE
MA
MAX MAX MAX - Section [099] MAX
Once activated, send two signals to your
Central Station to confirm proper operation.
YROUTE MA YROUTE MA X INST X INST
YROUTE MA YROUTE MAX INST X INST X INSTALLA
(See Section 6.1)
MA MAX X X X X TO THE PANEL MA
MA
MAX X X X X MA MA MA
(See Section 7)
MA MA MAX X X X X WITH CONNECT 24
MA
ALLA ALLA TION IS NOW COMPLETE. TION IS NOW COMPLETE.
ALLATION IS NOW COMPLETE. ALLA TION IS NOW COMPLETE. TION IS NOW COMPLETE.
1 1 1 1 1
(See Section 6.13)
(See Section 7.3)