Interface - Dell PowerEdge M1000e Configuration Manual

3 Configure the CMC network settings:
– To set a static IP address, type
setniccfg -s<IP address><network mask><gateway>
and press <Enter>.
Use the appropriate settings for your network.
– To configure the CMC to obtain an IP address using DHCP, type
setniccfg -d
and press <Enter>.
4 To activate the new network settings, type
racadm racreset
and press <Enter>.
Logging in to the CMC Using the Web-Based Interface
1 Open a supported Web browser window.
For more information, see "Supported Web Browsers" in the CMC User's
Guide.
2 Login to the CMC.
– If the CMC is accessed using a specific IP address, type the following
URL In the Address field, and then press <Enter>:
https://<CMC IP address>
The default IP address for the CMC is 192.168.0.120. If the default
HTTPS port number (port 443) has been changed, type:
https://<CMC IP address>:<port number>
where <IP address> is the IP address for the CMC and port
number is the HTTPS port number.
– If you access the CMC using a registered DNS name, type the CMC's
name:
https://<CMC name>
By default, the CMC name on the DNS server is cmc-<service
tag>.
Configuration Guide
25