Teac GF-550 Owner's Manual page 16

1
"--" blinks for a few seconds.
When no disc is set, "no dISC" appears on the display.
2
3
< Never place more than one disc on the tray.
< The disc must be placed in the center of the disc tray. If the disc
is not correctly loaded, it may not be possible to open the tray
again once it has closed, so you should ensure the disc is always
centered on the tray.
< Do not force the tray by hand during opening and closing
operations.
16
L
4
< Be careful not to pinch your finger.
< It takes a few seconds for the unit to load the disc. No buttons
will work during loading. Wait until the total number of the tracks
and the total play time of the disc are displayed.
disc type indicator
total number of the tracks
< The disc type indicator shows the type of disc currently loaded.
A commercial pre-recorded CD
A finalized CD-R
A finalized CD-RW
A CD-R which has yet to be finalized
A CD-RW which has yet to be finalized
No disc or unreadable disc
When a non-audio disc is inserted, the unit may start playing in
order to read the data, however there will be no sound.
5
Disc playback starts from the first track, and y lights on the display.
< If you load the disc, and then press the PLAY/PAUSE button
(y/J) without having first closed the disc tray, the disc tray
closes and playback starts.
L
total play time of the disc
y J