Safety and installation instructions
2
Safety and installation instructions
Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
Damage to the product resulting from mechanical influences
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
I
NOTE
If you do not have sufficient technical knowledge for installing
components in vehicles, you should have a specialist install the
inner frame in your vehicle.
Please note the following:
If faults or disturbances occur, consult a specialist workshop immediately.
Risk of breakage! Do not tread on the glass dome.
Keep the roof light free of snow and ice.
The electrical connections should only be performed by an electrician.
Replace the defective lights using ones of the same type which have the
same technical data (12 V, 5 W).
3
Scope of delivery
No. in
Quantity Description
fig. 1
1
10
2
4
3
16
4
1
4
Ventilation grille
Lamp covers
Fastening bolt ∅ 2.5 x 12 mm
Inner frame
Heki Accessory
EN