Preparing For Use; Accessory Assembly - Sunbeam SB20 Operating Instructions Manual

•
Make sure the steamer is unplugged. Turn the
Switch to OFF.
•
Remove the Water Tank, turn it upside down,
and unscrew the Valve Cap (see Figure
4). Fill the Water Tank with cool water, and
replace the Valve Cap. To prolong the life of
your steamer, we recommend using distilled
or de-mineralized water. Place the water tank
securely onto the unit's cavity (see Figure 5).
Warning: Operating with a dry water tank may
cause damage to the unit.
•
Plug the cord into a working outlet.
•
Turn the Switch to ON. The light on the switch
should be illuminated, and the nozzle should
start discharging steam in approximately 45
seconds.
•
Important: When not steaming, always set the switch to OFF
and unplug the cord from the outlet.
The garment steamer comes with 2 accessories,
a Fabric Brush and Folding Clothes Rack. These
accessories can aid during steaming process.
•
Fabric Brush sweeps away unwanted threads,
lint and more.
•
Folding Rack secures the clothes to avoid
shimmy during steaming.
FOLDING CLOTHES RACK ASSEMBLY
1.
Insert the Clothes Rack (A) on the Telescopic
Pole (B). (Figure 6)
2.
Slant the hook (D) of Folding Rack (C)

PREPARING FOR USE:

ACCESSORY ASSEMBLY:

Fig. 4
Fig. 5
Fig. 6
Fig. 7