Problems And Solutions - Sunbeam SB20 Operating Instructions Manual

PROBLEMS AND SOLUTIONS:

PROBLEM
The unit fails to
steam.
The Indicating
Lamps do not
turn on.
The unit fails to
steam.
The Indicating
Lamps are lit.
Excessive
gurgling of
Hose and
Steam Nozzle.
Steam is
intermittent.
REASON
Steamer is not
plugged in.
Household Circuit
Breaker / Ground
Fault Interrupter is
tripped or Fuse is
blown.
Mineral build-up in
the unit.
The Water Tank is
empty.
Condensation in
hose.
Mineral build-up in
the unit.
SOLUTION
Plug into electrical outlet.
Check the power outlet. If you
need assistance, contact a
qualified electrician.
Follow the Removing Mineral
Build-up instructions.
Refill the Water Tank.
Some gurgling is a natural
effect of the steam process.
For excessive gurgling,
extend the hose vertically to
allow water to drain back into
the Water Reservoir.
It is normal for the unit to
periodically stop steaming for
a few seconds. If the steam
stays off for longer periods,
follow Removing Mineral
Build-up procedure.