Sunbeam SB20 Operating Instructions Manual page 5

•
Place the clothes hanger hook onto the top telescopic pole (A)
as shown in Figure 1.
•
Insert the bottom of the telescopic pole into the pole base as
shown in Figure 2.
•
Turn the pole base lock clockwise until tightened.
•
Loosen the clips on the telescopic pole.
•
Pull the pole up to its full extension and tighten the clips as
shown in Figure 1.
•
Place the hose onto its threaded hose base by turning the fitting
at the end of the hose clockwise (see Figure 2). Do not over-
tighten.
•
Hang the Steam Nozzle on the Steam Nozzle Holder as shown
in Figure 3.
Fig. 1
ASSEMBLY INSTRUCTIONS:
Fig. 2 Fig. 3