Assembly - Reebok 125 AXB User Manual

ASSEMBLY

To make assembly easier, carefully read the
following information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
1.
Before assembling the weight bench,
make sure that you have read the tips in
the box above.
Attach a Small Foot (18) to the Left Upright (1)
with two M4 x 16mm Screws (25).
Attach the other Small Foot (18) to the Right
Upright (4) in the same way.
Orient the Left Upright (1) as shown, and attach
it to the Crossbar (2) with two M8 x 80mm Bolts
(31) and two M8 Locknuts (27). Do not tighten
the Locknuts yet.
Attach the Right Upright (4) to the Crossbar
(2) in the same way.
All manuals and user guides at all-guides.com
6
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Assembly requires only the included tools.
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
4
2
18
1
31
27
31
18
25