Adjustment - Reebok 125 AXB User Manual

ADJUSTMENT

This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for several exercises.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immedi-
ately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use sol-
vents to clean the weight bench.
ADJUSTING THE BACKREST
To use the Backrest (8) in the declined position,
remove the Backrest Support (14) and lay the
Backrest on the Crossbar (2).
To use the Backrest (8) in the level position or either
of the two inclined positions, set the Backrest Support
(14) in a set of brackets on the Uprights (1, 4).
WARNING:
Backrest (8) in a level or inclined position,
make sure that the pins on the Backrest
Support (14) are fully inserted into the holes
in the brackets on the Uprights (1, 4).
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (6), slide the desired weights
(not included) onto the Weight Tube (11) and secure
them with the Weight Clip (42).
WARNING:
than 50 lbs. (23 kg) on the Weight Tube (11).
Always secure weights with the Weight Clip
(42).
All manuals and user guides at all-guides.com
When using the
Do not place more
4
14
6
11
42
Weight
11
8
1
2