Do you have a question about the 7 and is the answer not in the manual?
Questions and answers
Kristen Lynas
June 2, 2025
How do you override the Pump-Stop feature?
1 comments:
Mr. Anderson
June 2, 2025
To override the Pump-Stop feature on Astralpool part number 7, follow these steps:
1. Unlock the screen. 2. Press “SET” to access the Pump Stop settings. 3. Set the Pump Stop alarm to 0 (OFF). This disables the function. 4. Confirm the setting to validate.
Note: This should be done especially when the controller is connected to an electrolysis system.
Need help?
Do you have a question about the 7 and is the answer not in the manual?
Questions and answers
How do you override the Pump-Stop feature?
To override the Pump-Stop feature on Astralpool part number 7, follow these steps:
1. Unlock the screen.
2. Press “SET” to access the Pump Stop settings.
3. Set the Pump Stop alarm to 0 (OFF). This disables the function.
4. Confirm the setting to validate.
Note: This should be done especially when the controller is connected to an electrolysis system.
This answer is automatically generated