SMART Embedded Computing MVME2500 User Manual page 14

Booting VxWorks
5. Set the VxWorks disk boot command.
setenv vxdiskboot 'ext2load scsi 0:1 0x1000000 $vxbootfile &&
setenv bootargs $vxbootargs && bootvx'
6. Save your current environmental variables.
saveenv
7. To boot VxWorks on Core 0 through hard disk, execute the following command:
run vxdiskboot
This will boot VxWorks on Core 0 only.
For sample output of VxWorks booting on Core 0 through hard disk, refer to
A.2.1, VxWorks Booting on Core 0 on page
8. Boot VxWorks Image on Core 1, execute wrload command.
Example: wrload "-file <image dir>/vxWorks -cpu 1"
To access the core1 Console use the tip utility
Example: tip "dev=/ttyMsd0#tag=green".
For more information refer the tip utility documentation.
For sample output of VxWorks booting on Core 1 through hard disk, refer to
Section A.2.2, VxWorks Booting on Core 1 on page
14
30.
31.
MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)
Booting VxWorks
Section