Print Position; Supply Position - Paxar Monarch 9855 Operator's Handbook Manual

S u p p l y P o s i t i o n
This function adjusts the machine to print at the vertical 0,0 point
on the supply. The supply position adjustment should only be
made on inital printer setup. For format adjustments, change the

print position.

Do not modify the supply position when using RFID supplies
greater than two-inches feed length. However, for RFID supplies
with a one-inch feed length, adjust the supply position to -50.
Depending on the width of the inter-label gap (space between die
cut labels), you may need to increase or decrease this value.
Refer to your RFID Application Notes for more information.
You may need to adjust the supply in or out to allow
N
tags and labels to be removed.
N
die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
N
Increase the number to feed more supply out of the chute.
N
Decrease the number to feed less supply out of the chute.
This option takes effect on the next label or tag printed.
Changing supply position may also affect print position.
To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Then, follow these steps.
1. Press l or r until you see
2. Press Enter/Pause. The current setting is displayed, for
example:
All manuals and user guides at all-guides.com
POSITIONING
l
Supply Pos
Enter supply pos
[-300/300]: +0
r
Setting Supply Options 4-9