Guitar With Piezo Pick-Up + Vocal Microphone - TC Electronic Multi-effects Processor G-Natural User Manual

Guitar with piezo pick-up + vocal microphone

As explained in the previous example G-Natural can
handle both a dynamic or condenser microphone and an
active* piezo pick-up system as found is many acoustic
guitars. In this setup example the microphone is used for
vocals.
Connections
• Connect the output of your guitars piezo pickup to the
Instrument input of G-Natural
• Connect the microphone to the mic input of G-Natural
• Connect L/R outputs to a mixer or to a dedicated
acoustic guitar amp
* If the pickup system requires the use of a battery the
system is active.
MIXER
Instrument
input
LR outputs
algorithm select
VARIATIONS
factory
hold to save
1 2 3 4 default store levels
preset bank | tune
thicken clean
detune analog Decay PreDly Color MixMM
vibrato spring tape
3
tremolo hall dynam + 1.2s 250ms 100%
studio chorus room reverse
+ 3
stomp EQ boost flanger plate p.pong
+ edit A edit B edit C
comp EQ boost mod reverb delay subdiv
COMP MOD DELAY
BANK UP
1 2 3
BANK DN
Guitar with an
active pick-up system
Microphone input
menu
25%
edit D
REVERB
BOOST
/TAP TEMPO
G•NATURAL
WARNING! When connecting the G-Natural
outputs to microphone inputs on a mixing console,
the phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
Basic settings
• If a condenser microphone is used you must enable
the +48V phantom power
• Set input sensitivity via the Levels menu
• Select active effect pressing the COMP, MOD,
DELAY and REVERB switches
• G-Natural feature separate EQ and compression
settings for mic and instrument inputs
TYPICAL SETUPS
13