Guitar With Piezo Pick-Up - TC Electronic Multi-effects Processor G-Natural User Manual

Guitar with piezo pick-up

This is a typical setup with a standard acoustic guitar
with an active* piezo pickup system.
Connections
• Connect your guitar to the G-Natural's instrument
input
• Connect L/R outputs to a mixer or to a dedicated
acoustic guitar amp
When connecting the G-Natural outputs to
microphone inputs on a mixing console, the
phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
MIXER
LR outputs Instrument input
algorithm select
VARIATIONS
factory
hold to save
1 2 3 4
default preset bank | tune store levels menu
thicken clean
detune analog Decay PreDly Color MixMM
vibrato spring tape
3
tremolo hall dynam + 1.2s 250ms 100% 25%
studio chorus room reverse
+ 3
stomp EQ boost flanger plate p.pong + edit A edit B edit C edit D
comp EQ boost mod reverb delay subdiv
COMP MOD DELAY REVERB
BANK UP
1 2 3 BOOST
/TAP TEMPO
BANK DN
G•NATURAL
Guitar with an
active pick-up system
Basic settings
• Set input sensitivity via the Levels menu
• Select active effect pressing the COMP, MOD,
DELAY and REVERB switches
* If the pickup system requires the use of a battery the
system is active.
TYPICAL SETUPS
11