Attaching The Strap; Memory Storage - Oregon Scientific DS9810 User Manual

ATTACHING THE STRAP

MEMORY STORAGE

Secure Digital (SD) cards / Multi-Media cards (MMC) are external
memory cards that can be plugged into your digital camera for storing
photos and videos.
When no more storage space is available, "Memory Full" is shown on
the LCD.
DS9810 EngManl R3 (V2.0) OP
All manuals and user guides at all-guides.com
1. Pass the thin loop of the strap through the
camera's strap ring.
2. Pass the other end of the strap through the
loop.
3. Tighten by pulling the loop.
1. Turn off the camera.
2. Open battery compartment on the
3. Slide the card into memory slot until it
4. To remove, push against the card
NOTE: The SD card / MMC will not insert
fully into the slot if it is facing the wrong way.
Be careful not to apply undue force to the
card.
NOTE: Do not insert or remove SD card /
MMC while camera is on. You must turn off
the camera when inserting or removing the
card, and then power on after insertion or
removal.
5
¶´ƒ
bottom of the camera.
clicks into position.
lodged inside the memory slot. The
card automatically ejects itself out
of the slot.
4
1/7/05, 4:00 PM