Table of Contents
Advertisement
Resolution
ISO Setting
Capture Mode
Flash Icon
White Balance
Battery Level
Indicator
Current Date
3. If you want to save battery power while using your camera, press
4. Press DISP a fourth time to turn the LCD back on to show full
NOTE: In Video Capture mode, you cannot choose between different
LCD information settings.
TAKING BASIC PICTURES
1. Frame and view your subject in the LCD.
2. Press and hold the SHUTTER RELEASE button half way to focus
NOTE: If the object cannot be focused during auto-focus, the bottom
LED by the viewfinder turns to green. When focusing, the LED blinks
green slowly.
The bottom LED will light up and blink slowly during auto-focus, and
stop blinking once auto-focus is ready. The bottom LED will blink quickly
to indicate auto-focus is not ready.
AUTO-FOCUS
The camera's auto-focus lens takes photos at a range of 1 m to infinity
(normal), and approximately 10 cm (macro). The macro-focusing
function lets you move the camera lens very close to the subject,
allowing you to take close-up photos with clarity and in detail.
DS9810 EngManl R3 (V2.0) OP
All manuals and user guides at all-guides.com
DISP a third time to turn off the LCD.
information.
on the subject. The bottom LED by the viewfinder will show green
meaning the camera is on auto-focus and ready to take a photo.
7
¶´ƒ
Quality
Number of Photos Taken
Number of Photos
Available to Take
Memory Type
Current Time
6
1/7/05, 4:00 PM
Advertisement
Table of Contents
