Mitsubishi Electric G150 Manual page 16

All manuals and user guides at all-guides.com
• The second line displays 2-Dial and a caller identifier
(if available).
• When the call connects, its status designation
changes from 2-Dial to 2-Actv.
To retrieve the call (the active call is put on hold), either:
• Press .
• Press 2, then
• Select Swap from the Main Menu and press
Multi-Party Conferencing
Adding Parties by Calling Them
1. Put the first call on hold by pressing
number, or vise versa. The screen displays the first
call with the status 1-Hold and the second with 2-Actv.
2. Add the original call back into the conference by
selecting Join from the Main Menu and pressing
by pressing 3 and then
Adding Incoming Calls
1. Answer the call and put the first call on hold by press-
ing 2 and then
2. Reconnect the first call by pressing 3 and
selecting Join from the Main Menu and pressing
You can perform these steps to include up to 5 callers.
Holding Private Conversations
Select Private from the Main Menu, then select a person
from the list of calls. To return to the conference, press
or select Join from the Main Menu and press
16
.
. All parties are now active.
, or press only.
.
and dialing a
, or
, or by
.
.