Volume Controls; Adjusting Ringer Volume - Mitsubishi Electric G150 Manual

The caller’s number (if available) displays. If you have
this number in memory, the person’s name displays.
If you do not answer a call, Unanswered Calls and the
number of calls display. The phone stores up to 10
unanswered calls. View the phone numbers using
Unanswered Calls in the Memory Menu.

Volume Controls

Adjusting Ringer Volume

During Incoming Calls and Idle/Standby Mode (phone on,
no call placed), the volume control on the left side of the
phone controls ringer volume.
During Idle/Standby Mode, you can also do the following:
1. Press Right on the Express Key, then use Down on
the Express Key to select Settings and press
2. Use Down on the Express Key to select Volumes, and
press .
3. Select Ring Tones and press
• If vibrator is turned on, Vibrator ON displays and
the ring tone volume cannot be adjusted (G150
only).
• If vibrator is turned off or vibe & ring is off, a sec-
tioned line appears at bottom of the screen to
indicate the volume level.
4. Adjust volume using Right and Left on the Express
Key and press
If ramping is engaged, the volume increases by 1 volume
level each successive ring until full volume is reached.
All manuals and user guides at all-guides.com
to validate,
.
to exit this menu.
.
13