SCP SCIENCE DigiPREP Series Service Manual page 7

3. Power Supply
 The Fuse is fine
 Power cables are correctly inserted (see section 3)
Comments and observations:
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________
4. Heater and Monostable Circuit
 DigiPREP block is connected into the controller
 DigiPREP block is heating accordingly
 COM2 dongle is correctly inserted
 DigiPROBE is correctly inserted into its socket
Comments and observations:
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________
5. CPU and general component verification
 The CPU daughter card is fully inserted
 The backup battery is functional
 Software runs accordingly
 Controller serial number
 Software version
KeyPad service manual
Rev.1.1
_______
_______
7