Viscount Prestige Series Advanced Manual page 131

Use the cursor keys and [ENTER] to select the song of your choice; the display will show:
* * * * * * * LOADING SONG * * * * * * *
for the time it takes to load the song, and then:
Prestige 100 - 80:
RECORD:RECORD_1
PD:PLY M.I:PLY M.II:PLY M.III:PLY CM:PLY
Prestige 70 - 60 - 50 - 40 - 20:
RECORD:RECORD_1
PD:PLY
Here again, the tracks that make up the MIDI sequence are identified by the PLY code.
Set REC for the tracks you wish to record.
The [CURSOR] keys can also be used to locate the cursor on the TEMPO field, to modify the
metronome tempo.
After setting all the parameters, press [START-STOP] to start the recording / playback. The sequencer
will start with the number of precount bars set earlier and the Led of the [START-STOP] button will
flash in time with the current tempo and the Time Signature set.
To stop the recording, press [START / STOP] again. The display shows the video page for saving
the sequence just recorded, in which the name of the song can be entered:
SEQUENCER SAVE:
SONG:
With the usual procedure, use the [CURSOR] buttons to move the cursor and the encoder to select
the characters. Then press [ENTER] to save the recording on the floppy disk [EXIT] to abort the
saving operation.
WARNING!
To make sure that existing recordings are not lost, when entering the name of the song take
care not to enter a name already on the disk. Otherwise, the original file will automatically be
overwritten.
ManI:PLY
SESSION1 .MID - Press ENTER to start
Advanced Manual - Viscount Prestige
Tempo:103
Tempo:103
ManII:PLY Common:PLY
129
Meas: 1
Meas: 1