Viscount Prestige Series Advanced Manual page 129

after which it will show the video page used to set up the recording:
Prestige 100 - 80:
RECORD:NEWSONG
PD:REC M.I:
Prestige 70 - 60 - 50 - 40 - 20:
RECORD:NEWSONG
Ped:REC
consisting of the following fields:
o RECORD: this displays the name of the MIDI sequence being recorded. For each new recording,
the name "NEWSONG" will always appear, while during a multidubbing recording, the song's
current name will be displayed.
o TEMPO: indicates the current metronome tempo. Locate the cursor on this parameter and use
the encoder if you wish to modify its value.
o MEAS: displays the bar (measure) reached in the recording.
o PD – M.I – M.II – M.III (only in models 100 and 80) – CM: these parameters set the status
of the Pedal, Man.I, Man.II, Man.III and Common tracks, as follows:
- REC: track being used to record the events performed on the organ.
- - - -: the selected track is not included in the recording. The events performed on the relative
section are not recorded.
Then press [START-STOP] to start the recording. The sequencer will start with the number of
precount bars set earlier (-1 in default condition) and the Led of the [START-STOP] button will
flash in time with the current tempo set.
To modify the number of precount bars and the time signature, keep the [METRONOME] button
pressed for a few moments before starting to record, and follow the instructions provided in point
8.3.
Otherwise, use [RECORD] or [EXIT] before starting to record to exit the sequencer function and
return to display of the main video page.
Tempo:120
REC M.II: REC
Tempo:120
ManI: REC ManII:
127
Advanced Manual - Viscount Prestige
Meas:
M.III: REC CM:
Meas:1
REC Common:
1
REC
REC