Stihl KM 85 Instruction Manual page 13

English
: Place the clamp (5) on the handle
support.
: Insert screws (6) in the holes and
clamp (3) and tighten them
moderately.
: Line up the bike handle.
: Tighten down the screws firmly.
12
All manuals and user guides at all-guides.com
10
7
9 8
Mounting the Control Handle
: Release the screw (7) and remove
it with the washer (8). The nut (9)
remains in the control handle (10).
: Push the control handle onto the
handlebar (1) – the throttle trigger
(11) must point towards the
gearhead.
: Line up the holes (12).
: Fit screw and washer in control
handle and tighten down firmly.
11
12
1
12
Fitting the Throttle Cable
Do not kink the throttle cable – make
sure the throttle trigger moves freely.
:
Adjusting the Throttle Cable*
On control handles with slide*:
:
*
13
14
14
13
14
Press the throttle cable (13) into the
retainers (14).
Go to chapter "Adjusting the
Throttle Cable".
see "Guide to Using this Manual"
KM 85, KM 85 R